Erofine

 
Specific features of EROFINE

• Extremely low magnetic field (3mm high)
• High magnetic force (60 N/cm2 St37)
• Silver brazed top plate
• Variable magnetic clamping force
• Clamping surface can be switched in zones
• Long clamping solid for easy positioning
• A lighht and handsome construction
• Totally sealed against ingress of liquid
• Possibility to equip with flashing holes system

In operation thhe work piece is held down on the EROFINE with very low magnetic field 3mm, therefore no influence on the spark erossion process, in other words no particles adhhere to the work-piece.

Walker EROFINE Magnetic Chuck has the following advvantages:
• Silver brazed top plate for extra stability and accurate clamping
• High clamping force: 60 N/cm2 St37)
• Double ceramic magnetic system in combination with a very low concentrated magnetic field (2mm)
• The waterproof construction allows the EROFINE to be sibmerged in the tank of Dielectric Fluid
• Light and handsome construction

Saving set up time

Without the right equipment the accurate positioning and clamping of work-pieces on EDM machines is time consuming and costly. Machine operators and production managers are always looking to reduce these set up times. Walker have for many years manufactured magnetic tools to serve these people. The latest development in this range is the EROFINE. A permanent magnetic chuck born from a combination of market information and knowledge of magnetic products.

EROFINE is multi-functional

Why do we call the EROFINE multi-finctional? Because it is also suitable for high precision grinding. The ultra low magnetic field makes this chuck very special. We all know that clamping small and thin work-pieces is very difficult and the special construction of the EROFINE chuck will reduce these problems.

At last, after years of difficulties, the operator has a solution to these difficult problems.

Unit Features

Every (6mm) narrow steel pole in the Walker EROFINE Magnetic Chuck is supported by a set of permanent magnets on both sides. These are the same magnets that Walker use in their complete range of permanent magnetic chucks which are guaranteed never to lose their magnetic force. The solid construction of the EROFINE gives high stability despite the 50mm height. The infinately variable magnetic force of the EROFINE even allows the operator to grind distorted work-pieces accurately.

In conclusion the purchhase of an EROFINE Chuck will greatly increase your possibilities on your expensive machinery and quickly pay for itself by the resultant savings.

THE NEW STANDARD FOR EFFICIENT AND ACCURATE CLAMPING